espa˝ol  |  english  |  deutsch  |  franšais
ELASTOMER SEATS - the diameter of these valves ranges from DN.25 mm to DN.2000 mm - for:
Butterfly valves

There are a few reasons that make butterfly valves stand out. They are simple and versatile, work under pressure and have a low maintenance cost, given that it is easy to replace the elastomer upon which the closure is made.


PRODUCT SHEET




Check valves

Their main feature of these types of valves is that by using a mechanism that is activated by the flow itself, they are able to block the return of a fluid that circulates through a pipe. The closure is made between the metallic cotter pins and the inside of the rubber sleeve valve using rubber-metal technology.


PRODUCT SHEET




Ball valves

In these types of valves, the sphere rotates and rests on an elastomer seat, ensuring complete watertightness and full maneuverability.


PRODUCT SHEET




Butterfly valves vulcanized to the body

In this type of valve, elastomer seat is attached to the body using rubber-metal technology. This type of valve is used in facilities where there is extremely high levels of pressure.


PRODUCT SHEET




Butterfly valves with coupling slots U.S.A.

These types of valves do not have lugs, and therefore, have a very simple mounting system. There are two types: one with the seat attached to the body and one with a rubber sleeve covering the disc, both of which use rubber-metal technology.


PRODUCT SHEET




** The diameter of these valves ranges from DN.25 mm to DN.2000 mm., manufactured with 34 different types of elastomers and each made for different applications, according to the various sectors that use them.


RUBBER SLEEVES USED FOR COVERING THE METAL DISCS OF BUTTERFLY VALVES

In these types of valves, the sleeve covering the metal disc prevents it from becoming corroded, while also making it watertight with the metallic body.


PRODUCT SHEET




FLEXIBLE IMPELLERS FOR TRANSFER PUMPS

The main characteristic of these impellers is that they make it possible to pump all types of liquids, are self-suctioning and easy to replace if maintenance is required.


PRODUCT SHEET




RUBBER BOOTS FOR MECHANICAL TRANSMISSION SYSTEMS

Rubber boots are used to protect the moving mechanical parts. They must be resistant to different fluids and have excellent dynamic properties.


PRODUCT SHEET




ELASTIC LOCKING JOINTS USED FOR VARIOUS MECHANICAL SYSTEMS

Various types of elastomer joints with different geometries, which facilitates the watertightness of any locking system.


PRODUCT SHEET




CUSTOM ORDER OF ANY RUBBER PART OR RUBBER-METAL SYSTEM

Cauchos Castilla S.L. :: Carretera de Villagonzalo, s/n :: Telf. (+34) 921 58 30 30 :: info@cauchoscastilla.es

 

Dise˝o Web Alicante 3dids